MEGGER DCM300E CLAMP METER

The DCM300E is designed mainly to check earth leakage currents. However, the upper range will measure currents of up to 300 A a.c. making it a totally versatile instrument capable of taking most current measurements. The instrument has four ranges; 30 mA, 300 mA, 30 A and 300 A with a minimum resolution of 0, 01 mA on the 30 mA range. For those hard to read measurements, where there are problems of accessibility or poor lighting, a data hold feature has been incorporated, to aid measurement. To save battery life when not in use the instrument has an automatic power off feature and will turn itself off if it hasn’ t taken any readings over a 10 minute period. This totally new clampmeter development ensures that the latest safety design standards EN61010-2-32 and EMC requirements are met. Safety is enhanced with the incorporation of a tactile barrier. Extra insulation has been used around the jaw specifically to reduce the possibility of causing a short circuit between live conductors, as well as protecting the operator from accidentally getting an electric shock. Features: 0.01 mA resolution EMC and EN1010-2-32 compliance 30 mA, 300 mA, 30 A and 300 A range 40 mm jaw size Analog Bargraph & Digital Display