CANNON CT600 CONSTANT TEMPERATURE BATH

The new Cannon CT-600 has many of the engineering and control features of the CT-500 bath, but the CT-600 also includes a built-in thermoelectric cooling unit. The CT-600 controls temperature per ASTM D 445 precision specifications between 10° C and 100° C, and is ideal for controlled temperature applications between 10° C and 30° C. When tests at low temperatures are to be made, the cooling unit is engaged via a switch on the front panel. When working at higher temperatures ( 30° C and above) , the switch is turned off. Nothing could be simpler. A special selector switch on the front panel facilitates rapid setting of ten popular temperatures for kinematic viscosity determinations: 10, 15, 20, 25, 30, 40, 50, 60, 80, and 100° C. After the switch has been set the bath will equilibrate to within a fraction of a degree of the desired temperature. A fine-tuning control then allows temperature adjustment to within ± 0.01° C of the target temperature as measured by the user’ s reference thermometer. By switching to the “ variable” setting on the front panel, any temperature within the operating range can be obtained. Ideal for kinematic viscosity determinations between 10° C and 30° C Built-in thermoelectric cooling provides “ rock-solid” temperature control at ambient and below Meets ASTM D 445 precision specifications from 10° C to 100° C