KANE 940 MULTIGAS EMISSION ANALYZER

The Kane 940 handheld emissions analyser is ideal for industrial boiler flue gas measurement and analysis. It operates on all boiler types and can display 8 parameters simultaneously showing measurements and calculations of boiler efficiency and pollution. The Kane940 measures oxygen, flue and nett temperature and calculates carbon dioxide, boiler efficiency, excess air and losses. Carbon monoxide is measured with a hydrogen compensated sensor for increased accuracy. It also calculates CO/ CO2 ratio ( The Poison Index) to give complete readings for effective boiler analysis and safety. With the addition of an extra sensor, nitric oxide ( NO) can be measured and the total NOx can be calculated. For more accurate pollution analysis an optional NO2 or SO2 sensor can be fitted at time of purchase. The high suction double headed pump allows the analyser to be used in flues with suction over 100 mbar without compromising measuring accuracy. The probe hose is lined with Teflon to reduce absorption of any sample gases. Features: Hand held and easy to operate Large display shows 8 different measurements simultaneously Multi-fuel: Natural gas, town gas, gascor, light & heavy oils, Propane, butane, anthracite, coke, coal and kinsale gas Measures O2 with a sensor guaranteed for 2 years Measures CO ( 0-10, 000ppm) , flue and nett temperature Calculates: Carbon Dioxide ( CO2) CO/ CO2 ratio Efficiency Excess air Pressure sensor for tightness testing and flue draught measurement Teflon line flue probe hose Options to measure NO ( 0-5000ppm) , NO2 ( 0-1000ppm) , SO2 ( 0-5000ppm) and calculate NOx Optional high range CO sensor ( 0-10% ) ( specify when ordering) Optional low range NO sensor ( 0-100ppm) ( specify when ordering) Infra-red/ serial link for data transfer to printer or PC Long life, rechargeable battery Memory stores up to 150 combustion test results