ALINCO DR135 RADIO RIG

Features of DR-135T/ EMKIII * Revised NEW circuit to be compliant to RoHS/ Lead-free order in EU. * Voice-only FXE-version available ( European model only, EJ-41U/ 47U not usable) . * EJ-41U internal TNC board is available as an option for 1200/ 9600bps packet * 50 watts, H/ M/ L power settings * 100 memory channels * Front panel data port * Rear panel DSUB9 computer connection * Frequency Range: TX( T) : 144-147.995MHz ( FM) RX( T) : 118-135.995 MHz ( AM) 136-173.995MHz ( FM) TX & RX( E) : 144-145.995MHz * Operating mode: 16K0F3E ( FM) / 8K50F3E ( Narrow-FM) F1( 9600bps) / F2( 1200bps) / 10F3 * 1 / A3E ( RX only DR135TMkII) * Channel steps: 5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 KHz * Memory channels: 100 channels + 1 quick recall ( CALL) * Antenna Connector: BNC ( 50ohm unbalanced) * Frequency stability: + / - 2.5ppm TCXO * Supply voltage: 13.8V DC + / - 15% negative ground * Temperature range: -10 - + 60c ( 14 - 140F) * Dimensions: 142( W) x 40( H) x 174( D) mm 5.59" ( W) x 1.57" ( H) x 6.85" ( D) * Weight: Approx. 1.0Kg ( 35.3oz) * CTCSS tone: encoder/ decoder 39 tones * Digital Coded Squelch: -encoder/ decoder 104 codes * Output power: Approx. 50W ( HI) Approx. 20W ( MID) Approx. 5W ( LOW) * Modulation system: Variable reactance frequency modulation * Spurious emission: Less than -60 dB * Maximum frequency deviation: + / - 5 KHz ( FM) / + / - 2.5 KHz ( NFM) * Receive system: Double-conversion superheterodyne * Sensitivity( -12dB SINAD) * 2: Less than -16.0dBu * Intermediate frequency: 1st IF 21.7 MHz, 2nd IF 450 KHz * Selectivity * 2: -6dB: 12KHz or more -60dB: 28KHz or less ( FM) -6dB: 6KHz or more -60dB: 16KHz or less ( NFM)