AEMC 1050 MEGOHM METER

The Megohmmeter Model 1050 is a 1000V Digital/ Analog Insulation Tester. It is designed to facilitate testing by incorporating automatic measurement features and user friendly functions. The Model 1050 provides test voltage combinations of 50V, 100V, 250V, 500V and 1000V. Measurements are displayed on a large dual-display LCD with bargraph for quick viewing of changes or trends. The Model 1050 automatically provides the DAR and PI ratios directly on the display. User defined PI time intervals may also be programmed. The user may even select DAR or PI functions before the test, and the megohmmeter will stop at the appropriate time and display the results. An automatic test inhibitor prevents testing on live circuits above 25V and discharge test voltage may be displayed. Specifications: Short Circuit Current : 25V Test Inhibition : Yes: > 25V Guard Terminal : Yes Range : 0.01© to 400k© Test Voltage : 12.4VDC max Short Circuit Current : < 6mADC Accuracy : ± 3% of Reading ± 3cts Range : 0.01© to 39.99© Test Current : e200mA from 0.01 to 20.00© Accuracy : ± 3% of Reading ± 4cts Buzzer : Yes Power Source : Eight 1.5V C Cells Remote Test Probe Operation : Yes ( optional) Report Print Out on Printer : No Storage of Readings over Time R( t) : 20 Readings Programmable Reading Intervals : 5 sec to 10 min Test Voltage Display : Yes Elapsed Test Time Display : Yes Test Voltage Lock-out : User programmed Storage of Test Results : 20 Readings Bi-directional Software : No PC Operation of Megohmmeter : No Safety Rating : EN 61010-1, 600V Cat. III, EN 61557 Double Insulation : Yes CE Mark : Yes