AEMC 5070 MEGOHM METER

The Megohmmeter Model 5070 is a fully automated 5000V graphical insulation tester. Selectable and programmable test voltage ( 40 to 5100V) . Programmable temperature correction of resistance readings. The Model 5070 is the only megohmmeter to offer both a graphical plot of the test right on the instruments, as well as a digital presentation of the test results. It has a large graphic display with five line alphanumeric display and graph. It also offers the ability to program up to three step voltage profiles, each containing up to five steps. The Model 5070 has an RS-232 port which provides the ability to configure the unit and run the test from a PC. Test results can be generated directly to a printer using the DataView® graphing and analysis software. Specifications: Short Circuit Current : < 1.6mA ± 5% Accuracy 1k© to 40G© : ± 5% of Reading ± 3cts 40G© to 10T© : ± 15% of Reading ± 10cts DAR ( 1 min/ 30 sec) ( 1) : 0.02 to 50.00 PI ( 10 min/ 1 min & user programmable) : 0.02 to 50.0 Dimensions : 10.63 x 9.84 x 7.09" ( 270 x 250 x 180mm) Weight : 9.5 lbs ( 4.3kg) Protection Index : IP53 Backlight : Blue electroluminescent Display Size : 3.75 x 3" ( 93 x 75mm) Display : Graphical: 320 x 240 resolution Report Print Out Direct to Printer : Yes – preset format Storage of Readings over Time R( t) : 128kB memory Programmable Reading Intervals : 5 sec to 15 min Test Voltage Display : Yes Elapsed Test Time Display : Yes Real Time/ Date Display : Yes Test Voltage Lock-out : User programmed Storage of Test Results : Stores over 1500 test results Communication Port : RS-232 PC Software/ Report Generation : Yes, DataView® ( included) PC Operation of Megohmmeter : Yes Safety Rating " : EN 61010-1, 1000V Cat. III Double Insulation : Yes CE Mark : Yes