Detail HOBO U30-NRC WEATHER STATION
The new HOBO Weather Station Starter Kit combines our most rugged data logging weather station with out-of-the-box convenience.
Features:
The new HOBO Weather Station Starter Kit combines our most rugged data logging weather station with out-of-the-box convenience. The U30/ NRC accepts up to 10 plug-and-play Smart Sensors. Just plug in your sensor and it’ s automatically recognized – no programming, wiring or calibration necessary. With this kit you can measure temperature, relative humidity, wind speed/ direction. Simply select the HOBO Weather Station starter system and your choice of either a 2-Meter or 3-Meter Tripod Kit and go!
Kit includes:
HOBO U30 NRC data logger with 10 inputs ( U30-NRC-000-10-S045-000 )
1.2W Solar Panel - SOLAR-1.2W
Temperature/ RH Smart Sensor with 2-meter cable - S-THB-M002
Wind Speed Smart Sensor with 3-meter cable - S-WSA-M003
Wind Direction Smart Sensor with 3-meter cable - S-WDA-M003
Full Crossarm for Wind Speed/ Direction sensors - M-CAA
Solar Radiation Shield for Temperature & RH sensor - RS3
Specifications:
Data Channels Max. 15 Channels
( Some Smart Sensors use more than 1 Channel)
Data Storage Capacity 512K Maximum Storage
( Number of Samples Dependant on External Sensors)
Sampling Rate 1 Second to 18 Hours
Smart Sensor Compatiblility Compatible with Onset Smart Sensors, Except S-BPA, S-TMA and S-THA
Logging Modes Immediate, Timed Delay, or Push-Button Start Options
Memory Modes Stop When Full; Wrap When Full
Sensor Inputs 10
Alarm Output Relay Activated, Deactivated or Pulsed on User-Defined Sensor Alarms
( Relay Configured as Normally Open or Normally Closed - Rated for 30 Volts and 1 Amp Max.)
Time Accuracy 0 to 2 Seconds for first data point and ± 5 Seconds per Week at 25° C ( 77° F)
Communications Full Speed USB via USB mini-B Connector
Enclosure / Materials Outer: ABS Blend with SS Hinge Pins, Bronze Inserts
Inner: Polycarbonate with Bronze Inserts
U-Bolts: Steel with Zinc Dichtomate Finish
Inner: Silicone Rubber
Cable Entry Channel: EPDM Rubber
Cable Entry Bars: Alum. w/ ABS Plastic Thumb Screws
Enclosure Access Hinged Door Secured by 2 Latches witEyelets for Securing with User-Supplied Padlocks
Mounting 3.8 cm ( 1.5" ) Mast or Wall Mount
Sensor Network Cable Length 100 Meters ( 328 ft) Maximum
Operating Range Temperature: -20° C to 40° C ( -4° F to 104° F)
Power Source Battery: 4 Volt, 4.5AHr, Rechargeable Sealed Lead-Acid
External Power: 1.2 Watt Solar Panel
Battery Life Rechargeable Service Life: 3 - 5 Years Typical Use
( Dependant Upon Environment and Operating Range)
Standards Compliance Weatherproof Enclosure. Tested to NEMA 6
Weight 2 kg ( 4 lbs 10 oz)
Dimensions 17.8cm x 11.7cm x 19.3cm ( 7.0" x 4.6" x 7.60" )
Optional Analog Sensor Port Specifications
Input Channels ( 2) Single-Ended
Field Wiring 2- or 3-wire via Screw Terminals on Detachable Connector
Input Range User-Configurable: 0 to 20 mA DC, 0 to 20 VDC ( Suitable for 2.5, 5, and 10 V Sensors)
Input Voltage 0 to 24 VDC
Input Current 0 to 24 mA DC
Current Source Impedance Minimum: > 20 K©
Accuracy ± 0.25% of FSR from 50mV to FSV
Excitation Power Switched 12 VDC, up to 50 mA; User-Selectable Warm-up from 5 msec to 2 Minutes
Tampilkan Lebih Banyak