TROTEC T650 CONCRETTE MOISTURE METER

The T650 is a professional hand-held instrument for fast, non-destructive determination of moisture content distributions in areas up to a depth of 4 cm from the surface. As a quality instrument that is " made in Germany" the T650 is impressive in terms of its digital precision without the disadvantage of drift in measured values exhibited by comparable analogue instruments. Damp and dry wall and floor areas can be detected by permanent real time display of the measured values. In addition, the device is suitable for preliminary inspection of the maturity of building materials in CM measurements. For an immediate evaluation of the measured data, minimum, maximum and average functions are available. In addition the current measured value can be retained by means of the hold function. Since the instrument’ s screen can display two values, for purposes of results evaluation a function value can be displayed at the same time as the current measured value if required. Technical data T650 Article no. ZB9110014 Material moisture measurement Surface moisture Measurement principle dielectric Measurement range 0 to 200 digit Resolution 0.1 digit Accuracy 0.1 digit Penetration depth 40 mm Alarm signal acoustic Options upper menu MAX, MIN, HOLD Options lower menu ALARM