ELCOMETER 204 ULTRASONIC THICKNESS GAUGE

The Elcometer 204 is pre-calibrated for ease of use and the gauge can be “ zeroed” to ensure accuracy. It is capable of measuring the thickness of material such as steel plate with repeatable accuracy. Battery powered, the Elcometer 204 features an easy read backlit screen making it ideal for use in low light areas. Supplied with everything required to start measuring as soon as the gauge is received, the Elcometer 204 provides an ideal, low cost solution for measuring thickness of steel. Material Thickness: The thickness of materials cannot always be determined by direct measurement as access to both sides is not always possible. The effects of corrosion and erosion at the back of a metal panel may reduce its thickness significantly yet not affect the front surface. Pipelines, for example, may appear corrosion free on the outside but can be eroded by the flow of material on the inside. Machined or cast items may have thin walls that cannot be determined by calipers or other non-destructive tests. • Low cost and easy to use: Provided with everything required to use straight from the box. • Ready to use: Supplied complete with transducer and gel ready to use straight from the box. • Probe Zero: “ Zeroing” the gauge ensures correct measurements. At a glance: • Low cost method of testing material thickness • Measure material thickness when there is only access to one side e.g.: pipes, tanks etc. • Hand held, fast and accurate Part Number Description C204---1 Elcometer 204 Steel Ultrasonic Thickness Gauge Range 0.63mm to 199.99mm or 0.025” to 19.999” ( switchable) Resolution 0.01mm ( 0.001” ) Accuracy ± 2% of reading or ± 0.5mm ( 0.02” ) , depending on material and conditions Weight 295g ( 10oz) Including batteries Dimensions 63 x 120 x 31mm ( 2.5 x 4.5 x 1.24” ) Operating Temperature -30° C to 50° C ( -20° F to 120° F) depending on climatic conditions Case Extruded aluminium body, nickle plated aluminium end caps Battery Life 200 hours continuous use ( alkaline dry batteries) Battery Type 2 x LR6 ( AA) , alkaline dry batteries Certificate Available Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory. Packing List Elcometer 204 Steel Ultrasonic Gauge, transducer with calibration certificate, ultrasonic couplant, 2 x batteries, carry case and operating instructions