Detail DAKOTA MMX7 ULTRASONIC WALL THICKNESS GAUGE
The new CHECK-LINE MMX-7 is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values. The MMX-7 features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use.
Features:
• The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
• Built in hardware AGC gain control for through paint measurements in multi mode operation.
• The MMX-7 has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
• CE Certified
• Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
• The MMX-7 also comes complete with our Windows® PC software for transferring data to and from a PC.
• The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.
• Use the AUTOFIND feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
• Includes NIST-Traceable Calibration Certificate
Includes: Gauge, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. TRANSDUCER SOLD SEPERATELY.
Specifications:
• Range in Steel: Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters ( 0.025 - 9.999inches) . Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm ( 0.100 - 4.000 inches) . Range will vary depending on the thick
• Resolution: .001 inches ( 0.01mm)
• Velocity Range: .0492 to .3936 in./ ms 1250 to 9999 meters/ sec
• Units: English & Metric
• Measurement Modes: Pulse-Echo ( flaws, pits) ; Echo-Echo ( thru-paint) ; Transducer Types: Dual Element ( 1 to 10 MHz) .
• Memory: 16 megabit non-volatile ram
• Memory capacity: 12, 000 pages with 1 reading and waveform per page
• Power Source: Three 1.5V alkaline or 1.2V NiCad AA cells
• Battery Life: Typically operates for 150 hours on alkaline and 100 hours on NiCad
• Auto Power off: if idle 5 min
• Display: 1/ 8 in. VGA grayscale display 62 x 45.7mm
• Keyboard: Membrane switch with twelve tactile keys
• Case: Extruded aluminum body with nickel-plated aluminum end caps ( gasket sealed) .
• Operating Temperature: -14° to 140° F ( -10° to 60° C)
• Weight, net: : 383 grams
• Dimensions: 63.5 W x 165 H x 31.5 D mm
• Warranty: 2 year limited
• Certification: CE Approved, Factory calibration traceable to national standards
Tampilkan Lebih Banyak