CHECKLINE TI007DL ULTRASONIC THICKNESS GAUGE

The TI-007DL is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. The TI-007DL incorporates a built-in memory for 1000 data points that can be separated into 10 separate " batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost. The gauges have a MEASURING RANGE from 0.0060 to 1.0000 inch, ( 0.15 to 25.40 mm) . Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in ECHO-TO-ECHO MODE as well as automatically switch to interface echo mode when measuring thicker materials and plastics. Features: • Measuring Range in Steel: 0.0060 - 1.000 inches. 0.150 - 25.40 mm • Resolution of 0.0001 inch ( 0.001 mm) • Selectable units of inch or mm • Memory for 1000 data points in up to 10 batches • RS-232C Serial output for downloading stored data to a printer or computer • TI-007DL-GT model available with Graphite Tip for measuring plastics • Windows compatible data transfer program supplied at no additional cost. • Large, backlit LCD display retains last reading • CE Certified • Includes NIST-Traceable Calibration Certificate Includes: Gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. Specifications: • Range in Steel: 0.0060-1.0000" ( 0.15-25.40 mm) • Resolution: .0001" ( 0.001 mm) • Display: 4½ - Digit, 0.5" Backlit LCD • Velocity Range: 6, 500-33, 000 ft./ sec ( 2000-10, 000 m/ sec.) • Transducer: Single element with delay tip. 10 to 22 MHz frequency range. • Probe Wearface: PEEK ( Polyethlethylketone) • Cable: 4 ft. ( 1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. ( 30 m) • Serial Output : RS-232C ( 8, N, 1, user-set baud rate) • Temp. Limits: Ambient: -20 to 120° F ( -30 to 50° C) . Material: 0 to 200° F ( -20 to 100° C) • Battery Type: Two AA batteries • Battery Life: 150 hours • Weight: 7 ounces ( 300g) • Size: 2.5 x 4.5 x 1.25" . ( 64 x 114 x 32 mm)