Detail EXTECH 407860 VIBRATION METER
Measures vibration levels in industrial machinery. Misalignment, poor balancing, structural compromises, and other factors can cause unwanted vibration increases. The Model 407860 has a frequency sensitivity that meets ISO-2954 and offers Displacement, Velocity and Acceleration features. This meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable service.
Features:
Ranges — Acceleration: 200m/ s2, Velocity: 200mm/ s, Displacement: 2mm
Remote vibration sensor with magnetic adapter on 39" ( 1m) cable
Record mode stores the maximum and minimum values for later recall
Wide frequency range of 10Hz to 1kHz
Resolution to 0.5m/ s2, 0.5mm/ s, and 0.005mm
Basic accuracy of ± ( 5% + 2 digits)
RMS or Peak Value measurement modes
Data Hold freezes the reading in the display
Auto shut-off saves battery life
9V battery power or optional AC adaptor
Built-in RS-232 PC serial interface with optional Data Acquisition Software
Specifications:
Display : LCD
Warranty Length: 3 Year
Accuracy: ± 5%
Auto Power Off: Yes
Battery Type: 9V
Data Hold: Yes
Interface: Built-in RS-232
Acceleration Range: To 656 ft/ s² or 200 m/ s²
Frequency Range ( Hz) : 10 to 1 K
Includes: Remote Sensor With 3.9 Foot ( 1.2 Meter) Cable, Magnetic Mount, Battery, Holster, Carrying Case And Instructions
Item: Digital Vibration Meter
Velocity: To 7.87 In/ s or 200mm/ s
Weight: 2.60
Tampilkan Lebih Banyak