BLUE WHITE SONIC PRO S3 ULTRASONIC FLOW METER

Features: Selectable Doppler or Transit Time operating mode. Custom quality metric algorithms and DSP technology ensures reliable, high accuracy measurements.  Quick and easy clamp-on transducer installation. Proprietary AGC ( Automatic Gain Control) algorithm eliminates manual gain adjustment.  Tamper Resistant - Factory configured for easy installation. LED lights indicate quality of measurement, set-up modes and error codes. Data logging to standard SD Card format. Factory configured to three minute time interval triggers. Logs time, date, flow rate and total flow values. 30, 000 events with included 32MB SD Card. Isolated 4-20 mA output - factory configured.  0 - 1000Hz Pulse output - factory configured.  Optional - Computer connection via RS-232, RS-485, USB, Ethernet. Permits remote access and control of all functions including real-time display, system configuration, data logging, remote data capture and process control functions. Software permits remote internet access through local network set-up. Applications: Sewage Wastewater  Pulp & Paper Slurries  DI water  Discharge water  Caustics  Chemical Slurries  Ground water  Food and Beverage  Petrochemical  Any sound conducting liquid Performance Specifications: Fluid velocity range shall be from 0.25 to 30 feet per second. Nominal pipe sizes shall be from 2.0 inch to 100 inch. Transit time accuracy shall be + / -1% of rate > 1fps, + / - 0.01 fps 12fps, + / - 0.25 fps < 12fps Operate on any input power from 110 to 250VAC, or 15 to 30 VDC without pre-configuration. Flow sensitivity shall be to 0.001 feet per second ( 0.0003 meters per second) . Display response time shall be user configurable for 0.25, 0.50, 1.0, 2.5, or 5.0 seconds. Flow rate averaging time shall be user configurable for 0.50, 1.0, 2.5, 5.0, or 10.0 seconds. Signal Processing Unit ( SPU) Enclosure shall be polyester powder coated aluminum rated NEMA 4X ( IP66) . Enclosure shall include all hardware required for mounting to a pipe, wall, or panel. Continuous operation at temperatures from 14o F to 140o F ( -10o C to 60o C) . User PC software shall be included that permits user access to all configuration menus, real-time display of flow rate and total flow to 10 digits plus exponent to E+ 32, and permit access to all log data stored in the memory buffer. Remote PC computer connections shall include Ethernet, USB ( Universal Serial bus) , and RS-232 serial ports. There shall be no local display. PC software display shall indicate currently active operating technology, currently active configuration number, transducer separation distance, 4 bar measurement reliability index, measured fluid sound speed, and process control relay status. Display languages of English, Spanish, French and German shall be user selectable. Five pre-set pipe configurations may be user configured. Automatic gain control shall adjust the signal strength. User adjustable signal strength shall not be required.