Detail TROTEC T600 Material Moisture Meter/ Microwave
By means of microwave technology it is possible to detect distributions of moisture content at a depth of up to 300 mm. Another advantage of the method, in addition to the great measuring depth, is its independence from the level of salt content present in the material. It therefore makes no difference to the microwave technique whether an older or a new building is being measured.
For an immediate evaluation of the measured data, minimum, maximum and average functions are available. In addition the current measured value can be retained by means of the hold function. Since the instrument’ s screen can display two values, for purposes of results evaluation a function value can be displayed at the same time on the easy-to-read screen as the current measured value if required.
A particular practical advantage of the T600 is the alarm function:
Here an individual limit value is entered into the unit before any measurements are taken. In this way large wall or floor areas can be measured quickly and effectively. The user can concentrate on the object being measured without having to look constantly at the measurement results on the display. As soon as the pre-defined alarm limit value is exceeded an acoustic warning signal sounds automatically! Since the T600 makes use of an innovative thumbwheel, by means of which all functions can be selected using only one hand, the other hand always remains free while measurements are taken.
Technical data T600
Article no. ZB9110012
Material moisture measurement Sub-surface moisture
Measurement principle Mikrowave method
Measurement range 0 to 200 digit
Resolution 0.1 digit
Accuracy 0.1 digit
Penetration depth 300 mm
Alarm signal acoustic
Options upper menu MAX, MIN, HOLD
Options lower menu ALARM
Tampilkan Lebih Banyak