VAREG VG-CS200 Micro Ohmmeter

The micro-ohmmeters VG-CS200 and VG-CS600 are used for ohmic measurements of high power switches etc. Both instruments are identical, except the maximal measuring current. The strengths of the instruments are the easy handling, rugged design and low weight. The two different kinds of displays, red LED and back lighted LCD, enables measuring in darkness, coldness and full sunlight. Designed for continuous measurements, the instrument has no limitation for the numbers of current cycles. An internal thermal printer is standard to enable logging of test results. With the option “ remote logging” all stored measuring values can be downloaded to a personal computer or laptop. A cable remote control is optionally available. The VG-CS200, with a weight of 8kg only, makes it very handy and easy transportable and the rugged case contains all test cables. Typical applications are ohmic tests of: - Circuit breakers - Disconnecting switches - High current busbar joints - Cable splices - Welding joints - Ground connections Micro-Ohmmeter Remote Control The remote control unit is used to control and monitor the VG-CS200/ 600. Integrated sense inputs enables remote controlled tests directly on the device under test. A 2-line back lighted LCD-display shows test parameters and results which can be sent to the printer. Three light emitting diodes indicates the status of the test in progress. The housing is waterproof and is specified to DIN40050/ IP67.