Detail GRAPHTEC GL220 General Purpose Data Logger
The bright, easy-to-read 4.3-inch TFT colour LCD monitor( WQVGA: 480 x 272 dots) makes it even easier to review measurement parameter settings, measured waveforms, and digital values. All the GL220' s functions can be accessed through the navigation cluster and LCD screen. Single touch buttons for such tasks as display mode, setup and logging start/ stop negate the need for complicated menu trees.
Description:
Type: General purpose data logger / Paperless recorder.
Channels: 10 ( Not expandable) .
Inputs: Voltage, Current* , Temperature, Humidity and Logic I/ O.
Speed: 10ms to 1hr.
Resolution: 16bit.
Data Storage: 2GB internal memory or USB device.
PC Connection: USB.
Data transfer: USB memory device or direct to PC.
Power: Internal Battery or External 12~ 24 volts DC.
Software: Software included.
GL220 Main Features
Inputs: Voltage ( 20mv to 50V) , Thermocouples ( K, E, J, T, N, R, S, T, B, W) and 4-20mA signals via external shunt resistor. Optional Graphtec Humidity sensor is available.
One pulse input and one trigger input.
16-bit ADC resolution.
10.9cm ( 4.3" ) colour LCD display ( WQVGA: 480 x 272 dots) .
Waveform and text display modes.
Easy-to-use keypad menu system.
Single open-collector alarm output.
Range of trigger functions.
Real-time statistical calculation.
Built-in 2GB flash memory.
2 x USB 2.0 interfaces - one for USB Memory stick and one for PC connection.
Built-in battery for up to 6 hour operation.
Scan speed - Maximum.
10 milli Seconds for 1 channel.
20 milli Seconds for 2 channels.
50 milli Seconds for 5 channels.
100 milli Second for 6-10 channels.
Ultra small ( 194 x 117 x 42 mm) .
Tampilkan Lebih Banyak