TROTEC BG20 CO Carbon Monoxide Meter

The BG20 in the MustiMeasure series allows you to determine the exact CO concentration in the ambient air and by this means ensure that existing workplace limit values are complied with. The hand-held device is ready for operation within seconds of having been switched on and can detect CO concentrations ranging from 0 – 1, 000 ppm quickly and reliably. These values, which can be determined exactly to within ± 10 ppm, are then presented as clearly visible figures on a large, backlit display. As many as 10 metered values can be stored directly in the BG20’ s onboard memory. Even critical levels can be checked quickly and easily thanks to the integrated alarm function. If the values exceed 35 ppm, then the measuring device warns the user automatically via an acoustic warning tone which sounds at increasingly short intervals the higher the concentration gets, before developing into a permanent warning tone as soon as a value of 200 ppm is exceeded. Technical data BG20 carbon monoxide measuring device Article No. 3.510.205.060 Measuring range 0 - 1, 000 ppm Resolution 1 ppm Accuracy ± 5 % or ± 10 ppm Type of sensor stabilised electrochemical gas specified ( CO) Warm-up time < 20 seconds Functions maximum value display, hold function, backlit display, alarm warning function, auto power off, memory for 10 metered values Operating conditions 0 ° C to 50 ° C, 0 % to 99 % r.h. ( non-condensing) Dimensions 160 x 56 x 40 mm Weight 180 g Scope of delivery measuring device, battery, carrying case, operating instructions