Detail EXTECH 407113 CFM Metal Vane Anemometer
Features:
Built-in RS-232 PC serial interface with optional Data Acquisition software
9V battery power or optional AC adaptor
Data Hold plus Auto power off
Record/ Recall MIN, MAX readings
Air Velocity accuracy via low friction ball bearing vane wheel on 39" ( 1m) cable
Super large ( 9999 count) LCD display
Air Flow displayed in 3 modes as an instantaneous value, up to 20 point average or 2/ 3 flow value
Display Air Flow ( CFM) or Air Velocity plus Temperature simultaneously
For a heavy duty anemometer that can withstand an airspeed up to 7880 feet per minute and temperatures of 80 degrees Celsius and 175 degrees Fahrenheit, look no further than the Extech 407113: Heavy Duty CFM Metal Vane Anemometer. This weather equipment has the ability to show you the measured air flow in three different modes which can be selected by the user, either as an instant value, up to a 20 point average or a 2/ 3 flow value.
Once the measurements of air velocity and temperature have been accurately taken, they will be shown to you almost instantly on the LCD display, where you have the option of viewing either the air velocity and the temperature or the air flow and the temperature. This means you don’ t have to keep swapping between the two.
This piece of weather equipment also comes with a minimum and maximum data recording function where you can also recall them onto the screen at a later point. There is also a data hold feature which freezes the measurements on screen for you at the touch of a button.
Built into this anemometer is a RS-232 PC interface which can then be used alongside the optional data acquisition software which also has a datalogging function. This will store measurements inside the device’ s memory so that you can transfer them onto your PC to analyse and produce reports.
The weather vane itself that actually takes the measurements of air velocity is attached to a cable measuring 120 centimetres in length, so you can get to those out of reach places with ease.
The Extech 407113: Heavy Duty CFM Metal Vane Anemometer comes with a 9 volt battery included that can be recharged, so you can start using it straight away, and a protective holster and stand for hands free testing.
Includes:
9V Battery
Rubber Holster
Metal Vane Sensor with 3.9ft Cable
Specifications:
Display: Dual Display Multi-function 10, 000-count ( 0 to 9999) LCD
Measurements: Air Velocity - m/ s, km/ h, ft/ min, knots, mph; Air Flow - CMM ( m 3 / min) and CFM ( ft 3 / min) ; Temperature - ° C and ° F
Data Hold: Freezes displayed reading
Sampling rate: One ( 1) reading per second
Sensors: Air velocity/ flow sensor: Metal angled vane arms with low-friction ball bearing.
Temp. Sensor: Precision thermistor
MIN/ MAX: Records/ Recalls lowest and highest readings
Auto Power OFF: Automatic shut off after 15 minutes
PC Interface: RS-232 Serial Communications ( 16-bit data stream)
Over range indication: 1_ _ _ appears on the LCD
Low battery indication: LBT appears on the LCD
Power supply: 9V Battery ( consumption 8.3mA approx.)
Operating conditions Meter: 32 to 122° F ( 0 to 50° C) ; 80% RH max.
Sensor: 32 to 175° F ( 0 to 80° C)
Dimensions / Weight Main instrument: 7.1 x 2.8 x1.3" ( 180 x 72 x 32mm)
Sensor head: 2.8” ( 72mm) diameter
Weight: 0.84 lbs. ( 381g) for meter and sensor
Ranges: 100 to 7880ft/ min ( also in m/ s, km/ h, MPH, knots, Temperature ( F/ C) , airflow CFM, airflow CMM)
Accuracy: 2% rdg, Temp 1.5F ( 0.8C)
Max. Resolution: Airflow 1ft/ min
Tampilkan Lebih Banyak