Detail MEGGER MIT400 INSULATION AND CONTINUITY TESTER
The Megger MIT400 insulation and continuity tester has been designed for electrical testing by the utilities, industrial, commercial and domestic electricians. The wide range of features also makes the MIT400 series ideal for the maintenance and service/ repair engineer. They replace the well-established BM400 insulation tester range, given greater functionality with simplified
CATIV 600V applications
Insulation test voltages of 250V, 500V and 1000V and measurements to 200G©
TRMS & DC Voltage measurement
Continuity testing at 200mA down to 0.01© Analogue and dual digital display
Insulation & continuity limit alarms
PI/ DAR and Timer function
Test result storage
Insulation Testing
250 V , 500V and 1000 V insulation test voltages available
Test Lock locks insulation test on continuous.
Actual test voltage is displayed on the smaller digital readout.
Insulation result on the larger digital display.
Analogue arc display to replicate the response of a moving coil display.
Polarisation Index ( PI) and Dielectric Absorption Ratio ( DAR) functions
Insulation testing to 20 G© .
High quality flexible silicone test leads prevent measurement errors on higher G© ranges.
Test inhibit prevents testing if voltages in excess of 50 V are detected.
Insulation buzzer can be set to buzz if the insulation resistance is above a preset limit.
Continuity Testing
Auto test on circuit contact.
200mA or 20mA continuity test currents are available.
20 mA test current will considerably increase battery life.
Lead resistance compensation ( NULL) operates up to 9 © of resistance.
Buzzer ON-OFF selected by simple push button.
Continuity buzzer limit alarm is adjustable from 1 © to 20 © in 5 steps.
Tampilkan Lebih Banyak